Your settings can be accessed and changed anytime. Watch the video or follow the steps below to get back into setup mode to resume setup or to change a setting on your 3DTriSport Pedometer:
Note: When you enter setup mode (blinking "12Hr" or "24Hr" icon) your pedometer will exit setup if no buttons are pressed for more than 10 seconds. If you exit setup, follow step 1 again.
1. Make sure that you are in the correct Step Mode to enter setup and access your settings. Hit the MODE button until you see a 'Step' icon at the top of the screen display and the default Time under the line. The '-01 Days Record' icon must not be displayed (if you do see '-01 Days Record' under the line, hit the MODE button twice to get to Step Mode).
2. Hold down SET and release when you see 12Hr / 24Hr blinking (this is setup mode).
3. Hit MODE (-) or RES (+) to change values for each of the settings.
4. Hit SET to advance to the next setting you want to change.
5. Leave your pedometer idle for 10 seconds to exit setup mode. Your changes will be saved and your pedometer will be back in Step Mode ready to be used.
Feel free to refer to the list below for a handy guide on your 3DTriSport settings (every time you press SET you will advance to the next setting down on the list):
1. Time format setting (12Hr/24Hr).
2. Seconds (time).
5. Hour (time).
6. Minutes (time).
7. Month (date).
8. Day (date).
9. Year (date).
10. Distance (In/Cm).
11. Stride Length.
12. Weight.
13. Step Target.
NEED MORE HELP? Please contact us.
Email: click here to submit a request
Message: click the button on the bottom-right of the page
Call:
US +1 (855) 789 0204, Mon-Fri 9am-5pm PT (Pacific Time, California)
UK +44 808 178 7240, Mon-Fri 5pm-1am GMT (London)