Watch the video or follow the steps below to change the Time Format setting on your 3DTriSport Pedometer:
Start by checking whether your time is in the 12Hr or 24Hr format. In the 12Hr format, the time will display as 01:00 PM. In the 24Hr format, the time will display as 13:00 hours. By pressing SET while on Step Mode ("Step" icon at the top of the screen and the time beneath the line), you will see either a 12Hr icon or a 24Hr icon blinking.
If you selected the time to be displayed in 12Hr format, a ‘PM’ icon will be displayed for afternoon time. The ‘PM’ icon will appear to the left of the time on the screen and as you browse through the settings. No icons are displayed for AM time or for the 24Hr time format.
Note: When you enter setup mode (blinking "12Hr" or "24Hr" icon) your pedometer will exit setup if no buttons are pressed for more than 10 seconds. If you exit setup, follow step 1 again.
1. Make sure that you are in the correct Step Mode to enter setup and access your settings. Hit the MODE button until you see a 'Step' icon at the top of the screen display and the default Time under the line. The '-01 Days Record' icon must not be displayed (if you do see '-01 Days Record' under the line, hit the MODE button twice to get to Step Mode).
2. Hold down SET and release when you see 12Hr or 24Hr blinking.
3. Hit MODE to switch between the '12Hr' or '24Hr' time format.
4. Leave your pedometer idle for 10 seconds to exit setup mode. Your changes will be saved and your pedometer will be back in Step Mode ready to be used.
NEED MORE HELP? Please contact us.
Email: click here to submit a request
Message: click the button on the bottom-right of the page
US +1 (855) 789 0204, Mon-Fri 9am-5pm PT (Pacific Time, California)
UK +44 808 178 7240, Mon-Fri 4pm-12am GMT (London)